---
title: "How to set up the ATM fee the POS?"
slug: "1602862820"
updated: 2026-07-30T07:49:11Z
published: 2026-07-30T07:57:22Z
canonical: "help.ila.cegid.com/1602862820"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.ila.cegid.com/llms.txt
> Use this file to discover all available pages before exploring further.

# How to set up the ATM fee the POS?

- [x] PT
- [x] ES
- [x] AO
- [x] CV
- [x] MZ
- [x] ST
- [x] GW

- [x] Professional
- [x] Executive
- [x] Public Sector
- [ ] Omnia
- [ ] Evolution

---

The ATM fee represents the fee charged to all bank postings, performed using this payment method.

---

## Set up ATM fee

To set up ATM fee, follow these steps:

1. Access **Finances | P. Cash and Banks | Resources** | **Bank Postings**;
2. Edit a **posting** used on the point of sales;
3. Specify the **fee percentage** and the minimum and maximum **Values**;
4. Click **Save**.

---

## ATM fee calculation

The ATM fee calculation has the following behavior:

- Fee = Minimum value If the Rate is higher than 0, the minimum value is higher than 0 and the sales value x Rate <= Minimum value;
- Fee = Maximum value If the maximum value > 0 and the sales value x Rate >= Maximum value;
- Fee = Received Value x Rate On the remaining situations/conditions.

**Example:**

- Fee = 1,5%;
- Minimum value = 1€;
- Maximum value = 5€.

Considering this data, 3 scenarios are presented:

**Scenario 1** If the total sales value is 1000€, the fee will be calculated with the following operation 1000€ x 1,5%, that is, 15€. Since the maximum value set is 5€, that will be the fee to be paid.

**Scenario 2** If the total sales value is 50€, the fee is 0,75€. Since the maximum value set is 1€, that will be the fee to be paid.

**Scenario 3** If the total sales value is 100€, the fee is 1,5€, and this is the value to be paid because it is on the interval set by the minimum and maximum values.